Cressi Leonardo Dive Computer Manual: Setup, Modes and Key Settings Explained
Find what the cressi leonardo dive computer manual covers, from setup and dive modes to alarms and battery care, so you can use your computer confidently on ree
Updated November 2026
The cressi leonardo dive computer manual explains how to set up the computer, choose a dive mode, read the display and manage alarms before you ever hit the water. This guide walks through those same areas in plain terms, so you know what to check before a dive and what the screens are telling you during one. Always read the manual that ships with your unit, since firmware and settings can vary by version.
Before You Dive: Initial Setup
Start with the basics before your first dive. Set the date and time, choose your units (metric or imperial), and confirm the display brightness works for your conditions. Check the battery level first, because a low battery mid-dive is a problem you can avoid with a quick look at the start screen.
Shopping for one? See our guide: 4 Best Dive Masks with Computer for Reef Divers: Picks Compared (2026).
- Turn the computer on and confirm the battery indicator reads adequately charged or replace the battery if the manual recommends it.
- Set the date, time and units in the settings menu.
- Review the alarm settings for depth, time and ascent rate, and leave the defaults if you are unsure.
- Confirm the gas or mix settings if your model supports them, and match them to the tank you are breathing from.
- Look at the surface screen once more before you descend to make sure nothing has reset.
Understanding Dive Modes and Display Screens
Most dive computers of this type offer a standard air dive mode and may include a gauge mode for depth-only use or a free dive or apnea mode. Pick the mode that matches your dive plan before you enter the water, because switching modes underwater is not always possible. The manual lists the screens and which one appears in each mode.
During a dive, the main screen typically shows current depth, dive time, no-decompression time remaining and tank pressure if you have a transmitter connected. Learn where each value sits on the display at the surface, so you can read it quickly at depth without fumbling.
Setting Alarms and Managing Safety Limits
Alarms are where the manual matters most. Review the depth alarm, the time alarm and the ascent rate warning, and adjust them only with a clear reason. The ascent rate alarm is especially useful for slowing you down during the final part of a dive, when most people rush the ascent without noticing.
Know what each alarm sounds and looks like so you do not dismiss a real warning as a false one. Practice reading the alarm screens on a shallow dive first. For guidance on how dive computers link with other gear, see Scuba Regulator with Dive Computer: 6 Steps to Match and Set Up.
Post-Dive Care and Battery Maintenance
After each dive, rinse the computer in fresh water and dry it fully before storing it. Check the manual for the recommended rinse method and whether the unit can be submerged in fresh water after salt exposure. Keep the battery compartment seal clean and inspect the O-ring for nicks or debris before closing it.
If the computer stops responding, the manual usually lists a reset procedure. Battery replacement intervals vary by usage, so log the dates you change it. For a broader look at mask and computer integration, the guide Oceanic Dive Mask Computer: 5 Steps to Choose and Set Up for Reef Diving covers related setup habits.
Common Mistakes
- Skipping the pre-dive battery and time check, then finding the unit dead or mis-set underwater.
- Changing alarm settings the night before a dive without testing them.
- Ignoring the ascent rate warning because it feels like a minor prompt.
- Storing the computer wet or leaving the battery seal open, which invites corrosion.
- Assuming the manual for one model applies to another in the same family.
FAQ
Where can I find the cressi leonardo dive computer manual?
The manual is normally included with the unit, and the manufacturer’s official website typically hosts downloadable copies. Check that the version matches your model before following any steps.
Should I change the default alarm settings?
Only change them if you understand the reason and have tested the new setting on a shallow dive. Many divers keep the defaults until they have more experience.
Can I use the computer in freshwater or saltwater?
Both are generally supported, but rinse the unit in fresh water after saltwater dives and follow the manual’s guidance on immersion and servicing. Consult a dive professional if you are unsure about maintenance.
Conclusion
Reading the cressi leonardo dive computer manual before your first dive saves time and reduces surprises underwater. Set up the unit carefully, learn the modes and alarms, and maintain it after every dive. Revisit the manual whenever you change gear or dive profile.
Related reading
- Cressi Pano 3 Scuba Dive Mask: Fit, Features and Who It Suits
- Cressi Frameless Dive Mask: Fit, Features and Buying Tips for Divers
- Cressi Dive Mask with Prescription Lenses: 5 Best Picks Compared (2026)
- Cressi Calibro Dive Mask: Fit, Features and Buying Guide for Divers
Ready to choose one?
