We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Aqua Lung Dive Computer Manual: Setup, Settings and Key Functions Explained

Find out how to use the aqua lung dive computer manual to set up your unit, adjust key settings and understand modes before your next reef dive.

Updated November 2026

The aqua lung dive computer manual is the fastest way to learn how your unit handles depth, time, ascent rate and safety stops. This guide walks you through where to find the manual, what to read first, and how to check the settings that matter most before you get in the water. By the end, you will know how to confirm your computer is configured correctly and how to interpret its main screens.

Find the Right Manual for Your Model

Aqua Lung sells several dive computers, and each has its own manual with different menus and button sequences. Check the model name printed on the case or back of the unit, then download the matching PDF from the manufacturer’s website. Using a manual for a different model is one of the most common ways divers end up confused during setup.

Shopping for one? See our guide: Aqua Lung Dive Computer Comparison (2026): Which Is Better for Reef Diving?.

Set Up the Computer Before Your Dive Trip

Do your initial setup at home, not on the boat. Work through the manual in this order so nothing gets missed:

  1. Set the date and time so your dive logs are accurate.
  2. Choose metric or imperial units to match how you read depth and temperature.
  3. Select your gas mix if the unit supports nitrox, and confirm the oxygen percentage.
  4. Set your altitude mode if you dive near sea level or at higher elevations.
  5. Check the alarm settings for maximum depth, ascent rate and no-decompression limits.
  6. Confirm the computer is in the right mode, such as air, nitrox or gauge, before you descend.

Understand the Main Modes and Displays

Most dive computers cycle between a few core screens during a dive. The manual will show you how to scroll between them and what each one reports. Pay close attention to the following:

Display What It Shows Why It Matters on a Reef Dive
Current depth Your depth in real time Helps you stay above the reef and avoid deeper contact
No-stop time Minutes left before a decompression stop is required Guides your bottom time planning
Ascent rate Speed of your ascent, usually with color or alarm Keeps you within the safe rate the manual specifies
Safety stop timer Countdown at about 5 meters Supports a conservative end to each dive

Read the exact ascent-rate and safety-stop values in your own manual, since these can differ between models and are set by the manufacturer.

Practice Before You Need It

Spend a few minutes on the surface navigating the menus and triggering each alarm if the unit allows a test. Knowing where the button combinations sit saves you from fumbling underwater. If you use the computer with a wrist mount or console, confirm the display is easy to read at arm’s length while wearing your gloves.

Common Mistakes

  • Skipping the manual and relying on memory of a previous model.
  • Leaving the gas mix or altitude setting at a default value.
  • Ignoring battery warnings before a trip.
  • Turning off alarms to avoid nuisance beeps, which removes an important safety margin.
  • Failing to log the dive or review the data afterward.

A printed or waterproof copy of the manual is useful for the boat or a rental setup. A small dive slate makes it easier to note settings and dive times while you are traveling.

View on Amazon

Protective wrist covers or a console mount keep the computer visible and secure on reef dives.

View on Amazon

FAQ

Where can I find the aqua lung dive computer manual?

Check the model name on your unit and download the matching PDF from the Aqua Lung website. Manuals are model-specific, so confirm the number before reading.

Do I need to set up the computer before every dive?

Set it up once with your personal and gas settings, then confirm the mode and alarms before each dive. Settings usually stay saved between dives unless you change them.

What should I do if the display behaves unexpectedly?

Check the troubleshooting section of the manual first. If the problem continues, contact Aqua Lung support or a certified dive shop for service advice.

Conclusion

Downloading the correct aqua lung dive computer manual and working through setup at home makes your reef dives safer and less stressful. Confirm your units, gas mix and alarms before the trip, and practice the menus on the surface. Always follow the dive limits and safety guidance in your manual.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba diving gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Lanai.