We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Aqua Lung Squeeze Lock Dive Knife: 5 Steps to Use and Choose It Right

Learn how the Aqua Lung squeeze lock dive knife works, how to release and clean it, and what to check before a reef or shore dive.

Updated November 2026

The Aqua Lung squeeze lock dive knife uses a spring-loaded release that you press to open the blade lock, so you can open and close it one-handed underwater. This guide explains how the squeeze lock mechanism works, how to deploy and secure the blade safely, and what to check before each dive. It also covers how to rinse and store the knife so it keeps working season after season.

How the Squeeze Lock Mechanism Works

A squeeze lock knife holds its blade in place with a spring-loaded locking bar. Pressing the release on the handle pulls the bar back, which frees the blade to fold or open. When the blade is fully open, the bar snaps forward and locks it straight. Because the release is a squeeze rather than a slide, you can operate it with a gloved hand while holding onto a line or rock.

Shopping for one? See our guide: 4 Best Aqua Lung Dive Boots for Reef and Shore Diving (2026).

Before you rely on any knife, confirm that the lock engages with a firm click and that the blade does not wobble side to side when locked. A loose blade is a sign of wear or debris in the hinge.

Step-by-Step: Deploying and Securing the Blade

Practice these steps on dry land first, then repeat them in a pool or shallow water until they feel automatic.

  1. Hold the handle firmly and place your thumb on the blade pivot area.
  2. Squeeze the release to unlock the blade.
  3. Open the blade fully until the lock clicks into place.
  4. Give the blade a gentle tug to confirm it is locked.
  5. To close, squeeze the release again while folding the blade with your thumb, keeping fingers clear of the edge.

Dive Knife Checklist Before You Enter the Water

Run through this quick check every dive, especially if you have rinsed the knife in fresh water or stored it in a bag.

  • Lock engages with a clear click and holds without play
  • Release moves freely and springs back fully
  • Edge is free of nicks and sharp enough for cutting line or mesh
  • Sheath or clip is secure on your gear and easy to reach
  • No salt crust, sand or algae inside the hinge

Caring for the Squeeze Lock After Each Dive

Salt and sand are the main reasons a squeeze lock stops working smoothly. Rinse the knife in fresh water with the blade partly open so water reaches the lock. Work the release several times under the water. Dry the blade with a soft cloth and apply a thin coat of marine-safe lubricant to the pivot. Store it open slightly, not locked shut, so the spring does not stay compressed for long periods.

Manufacturers generally recommend checking the lock and edge at the start of each season. If you notice a loose blade or a release that sticks, stop using the knife and have it inspected or replaced. A failed knife underwater is a serious problem, so treat wear as a safety issue.

A sheath or belt clip keeps the knife where you can reach it without drifting off your harness, which matters on busy shore entries. View on Amazon

A small bottle of marine-safe silicone or lubricant helps keep the pivot and release moving freely between dives. View on Amazon

A cutting tool with a line-cutting notch is useful if you dive where fishing line or net is common. View on Amazon

Common Mistakes to Avoid

  • Storing the knife locked shut in a wet bag, which traps moisture in the hinge.
  • Skipping the freshwater rinse after a salt water dive.
  • Using the knife to pry rock or coral, which can bend the blade or loosen the lock.
  • Ignoring a release that sticks, since it often signals grit or corrosion inside.

For related gear that goes with your knife on a reef dive, see Aqua Lung Wetsuit 3mm Review: Features and Performance and Types of Dive Boots: Which Style Fits Reef and Shore Diving?

FAQ

Can I open a squeeze lock dive knife one-handed underwater?

Yes, that is the main advantage of the design. Practice the motion on land first so you can do it without looking. Keep your fingers clear of the edge while you work the release.

How often should I service the lock?

Rinse and lubricate after every salt water dive, and inspect the lock at least once a season. Replace the knife if the lock feels loose or the release sticks after cleaning.

Is a squeeze lock knife safe to store in a dive bag?

Store it in a sheath or with the blade partly open, and keep it away from other gear that could catch the edge. Dry it fully first to prevent corrosion inside the hinge.

Conclusion

The squeeze lock design gives you a fast, one-handed knife when you need it most. Check the lock, rinse after every salt water dive, and inspect the release regularly. If something feels loose or sticky, address it before you return to the water.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba diving gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Lanai.