Scubapro Mako Dive Knife: Features, Fit and Buying Tips for Reef Divers
Scubapro Mako dive knife guide covering blade style, mounting, handling and maintenance so you can pick the right dive knife for reef and shore dives.
Updated November 2026
The Scubapro Mako dive knife is a compact, general-purpose blade that many reef and shore divers keep on their hip or calf. This guide explains what to look for in a Mako-style dive knife, how to mount it so it stays put, and how to keep it working in salt water. By the end, you should know whether this type of knife suits your diving and how to set it up properly.
What the Mako Is Designed For
Dive knives are tools for tangled line, kelp, net and the occasional emergency. A Mako-style knife is meant to be used with one hand, reached quickly, and cleaned after every dive. Look for a blade long enough to cut line under tension but short enough to stay controlled in tight spaces. Many divers prefer a blunt or partly serrated tip so the knife does not snag on wetsuits or the reef during a rescue.
Choosing the Right Blade and Mounting Position
Before you buy, decide where you will carry it. The three common positions are:
- Hip or belt: Easy to reach from a horizontal swim position. Good for most reef divers.
- Lower leg or calf: Keeps the blade away from your hands and out of the way of gear. Useful for drift and shore dives.
- Chest or shoulder: Used mainly by technical or cave divers. Less practical for recreational work.
Whatever you choose, the knife should sit so you can draw it with either hand without looking. Test the reach while wearing your BCD and fins, not just standing on the dock.
Mounting and Securing the Knife Safely
- Confirm the sheath fits the blade snugly and has a retaining strap or lock.
- Mount the sheath on your harness, BCD D-ring or belt using stainless hardware or a quick-release that you have tested.
- Draw and re-sheath the knife five times on land. Repeat this underwater in shallow water until the motion is automatic.
- Check the mount after every dive for loosening, cracks or salt crust that could bind the blade.
Avoid mounting the knife where it can catch on a inflator hose or fin strap. Keep the handle facing the direction you will reach.
Caring for a Dive Knife Between Trips
Salt water corrodes steel quickly, even stainless. Rinse the blade and sheath in fresh water for several minutes after each dive, then dry them fully before storing. Once a month, check the edge for nicks and the pivot or lock for grit. Apply a thin coat of light marine-grade lubricant to any moving part if the manufacturer recommends it. If the blade shows pitting or the lock no longer engages firmly, have it inspected or replace it rather than relying on it in an emergency. For specific maintenance intervals, check the manufacturer’s care guidance.
Common Mistakes
- Mounting the knife where it cannot be reached with the hand you use most.
- Storing the knife in its sheath while still wet, which traps salt and promotes rust.
- Using the tip to pry or chop, which can break the blade.
- Never practicing the draw, so the first real use is stressful and slow.
- Ignoring a loose mount until it falls off on a drift dive.
Recommended gear
A stable mount keeps the knife in reach during the dive. A tether or retaining strap helps prevent loss in surge.
- Stainless dive knife sheath with retaining strap: keeps the blade secure during surge and movement. View on Amazon
- Marine-grade corrosion-resistant lubricant for knife pivots: helps protect moving parts after rinsing. View on Amazon
Related Reading
If you are building out your reef kit, you may also want to read Scubapro Synergy 2 Dive Mask: Fit, Features and Buying Tips for Reef Divers to match your knife to your mask setup. For night and reef work, Scubapro Nova Dive Light Options: 5 Best Picks for Night and Reef Diving (2026) covers complementary lighting. Footwear choices matter for shore entries, so see Scubapro Delta Short Dive Boots 3mm: Fit, Warmth and Buying Guide. Finally, 7 Best Scubapro Mesh Dive Bags for Boat and Shore Diving (2026) can help you keep everything rinsed and organized.
FAQ
Where is the best place to wear a dive knife?
Most recreational divers wear it on the hip or lower calf, where it can be drawn with either hand. Pick the spot that lets you reach it without disturbing your buoyancy or gear.
Should a dive knife be sharp or blunt?
A sharp edge cuts line effectively, while a blunt tip reduces the risk of snagging or puncturing a wetsuit. Many divers choose a blade with a blunt or partly serrated tip for general use.
How often should I service my dive knife?
Rinse and dry it after every dive and inspect the mount and edge monthly. Follow the manufacturer’s care guidance and replace any knife with pitting, a weak lock or a loose sheath.
Conclusion
A Mako-style dive knife earns its place when it is mounted where you can reach it and maintained after every dive. Practice the draw until it becomes second nature, and inspect the setup regularly. Check manufacturer instructions for specific care and mounting details.
Ready to choose one?
