We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Clean Dive Boots: A Step-by-Step Guide to Keep Them Fresh

Learn how to clean dive boots after every reef dive, including rinsing, deodorizing, drying and storage tips that keep neoprene from breaking down over time.

Updated November 2026

To clean dive boots properly, rinse them in fresh water right after your dive, wash the inside to remove salt, sand and odor, and dry them fully away from direct sun. Doing this after every reef dive keeps the neoprene flexible, stops grit from wearing down the soles and prevents the bacterial smell that makes boots unpleasant to put on again. The whole routine takes about 15 minutes once you have it down.

Rinse Them Right After Every Dive

Salt crystals and fine sand work their way into the seams and the sole tread within minutes, so the rinse should happen before you pack up your gear. Fill a bucket or use a hose with a gentle spray and run water through the inside of each boot. Pay attention to the heel, the toe box and the ankle collar, where grit tends to collect.

Shopping for one? See our guide: How to Clean Dive Mask: 6 Best Cleaners and Care Products (2026).

Wash the Inside and Outside

A mild soap or a cleaner made for wetsuits is enough for routine care. Dishwashing soap in lukewarm water works, but avoid bleach, solvents and harsh detergents, which can stiffen neoprene and weaken the bonding glue. Use a soft brush on the sole and the inner lining, then rinse again until no suds remain.

  1. Rinse with fresh water to remove salt and sand.
  2. Soak for 10 to 15 minutes in lukewarm water with a few drops of wetsuit or mild soap.
  3. Scrub the soles and the inner lining with a soft brush.
  4. Rinse thoroughly, checking the heel and toe box for leftover soap.
  5. Press out water gently. Do not wring or twist the boots.

Deodorize and Dry Them Properly

Odor comes from bacteria living in the damp lining, so an occasional deodorizing soak makes a real difference. A diluted white vinegar solution, about one part vinegar to four parts water, soaked for 10 minutes and then rinsed, is a common choice among divers. Turn the boots inside out and let them air dry in the shade. Direct sun can dry the neoprene unevenly and cause cracking over time, and a heat source such as a dryer or radiator will do the same. A related read: Microfiber Towel Close Up: How to Inspect, Clean and Choose One That Lasts.

Stuff the boots loosely with a dry towel or a bit of newspaper to hold their shape while they dry. Plan on one to two days for thicker boots to dry completely.

Store Them So They Stay Usable

Store dive boots flat or hanging loosely, never folded tightly or crammed into a bag while wet. Keep them away from heat, oil, petroleum products and sunlight. If you need a reference for how the neoprene responds over the long term, the basic care principles are similar to those covered in our guide to Dive Mask Neoprene Strap: How to Choose, Fit and Care for One (2026).

Common Mistakes

  • Leaving boots in the dive bag wet overnight, which encourages mildew.
  • Using bleach or strong solvents to remove stains.
  • Drying boots on a hot dashboard or in direct sun.
  • Skipping the rinse after saltwater dives and letting grit wear the soles.
  • Hanging boots by the straps or heels, which can stretch them out of shape.

A soft brush with bristles firm enough for sole tread but gentle on neoprene helps you clean seams without scratching. View on Amazon

A wetsuit-specific cleaning solution is formulated to remove salt and odor without stripping the neoprene. View on Amazon

A mesh dive gear bag lets wet boots drain and air out instead of trapping moisture. View on Amazon

FAQ

Can I put dive boots in the washing machine?

It is better not to. Machine agitation and spin cycles can damage glue bonds and stretch the neoprene, so hand washing is the safer option.

How often should I clean my dive boots?

Rinse them after every dive and do a full wash with a mild cleaner every few dives or whenever odor starts to build. Saltwater and sandy reef sites call for more frequent care.

Is vinegar safe for dive boot neoprene?

A diluted vinegar soak for a short time is commonly used to reduce odor. Rinse well afterward and avoid long soaks, and check the manufacturer’s care label if you are unsure.

Conclusion

Rinse, wash gently, deodorize occasionally and dry in the shade, and your dive boots will stay comfortable and last longer. A quick routine after each dive takes far less time than repairing or replacing worn boots. Check the care instructions from your boot maker if you have a specific model.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba diving gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Lanai.