Sherwood Amphos Dive Computer Manual: Setup and Key Settings Explained
Find the Sherwood Amphos dive computer manual, learn what each setting does, and set up your unit correctly before your next reef dive.
Updated November 2026
The Sherwood Amphos dive computer manual is the reference that tells you how to set up the unit, read its display, and adjust the settings that affect your dive planning. This guide walks through where to find the manual, what to check before your first dive, and which settings matter most for reef diving. Use it alongside the printed or downloaded manual, since the manual has the final word on your model’s features.
Where to Find the Sherwood Amphos Dive Computer Manual
Start with the paper booklet packed in the box. If it is missing, check the Sherwood or Johnson Outdoors support pages for a downloadable PDF, and confirm the document matches your exact model and firmware version. Dive computers get updated, and a manual from a different generation can list menus that do not appear on your screen.
Shopping for one? See our guide: 4 Best Dive Masks with Computer for Reef Divers: Picks Compared (2026).
Keep a copy on your phone or in your dive bag. Many divers find it useful to note the page numbers for the sections they use most, such as the alarm settings and the surface interval display.
Setting Up the Unit Before Your First Dive
Work through the setup menu at home, not on the boat. Changing settings with cold hands and a rocking deck invites mistakes.
- Confirm the time, date and units (metric or imperial).
- Set your altitude or altitude mode if the manual lists one. This matters if you dive at elevation.
- Check the alarm thresholds for depth, ascent rate and no-decompression limit, and adjust them to your comfort level.
- Set the gas mix if you use nitrox, and verify the oxygen percentage before the dive.
- Run a quick check of the battery level and confirm the display backlight works.
Key Settings and Functions to Understand
Most divers use only a handful of functions on a typical reef dive. Focus on these first:
- Depth and time display: Know which screen shows current depth, bottom time and maximum depth so you can read it without searching.
- No-decompression limit (NDL): The countdown tells you how much time remains at your current depth before a decompression obligation. Treat it as a floor, not a target.
- Ascent rate indicator: Most units flag when you rise faster than the recommended speed. Set the alarm and practice responding to it.
- Surface interval: This counts the time between dives and feeds into the next dive’s residual nitrogen calculation. Check it before every repetitive dive.
- Safety stop prompt: If your unit includes one, learn how it displays and how long the countdown runs.
| Screen or setting | What to check |
|---|---|
| Time, date, units | Correct before the first dive of the trip |
| Altitude mode | Matches where you are diving |
| Gas mix (nitrox) | Verified against your tank label |
| Alarm thresholds | Set to your own limits |
| Battery level | Checked before the dive day |
If your unit connects to other gear or software, the setup steps differ from a standalone console. For comparison, see Scuba Dive Computer Console: How to Choose and Set One Up (2026) and Scuba Regulator with Dive Computer: 6 Steps to Match and Set Up. For a general walkthrough of reef use, Using a Dive Computer: A Step-by-Step Guide for Reef Divers covers the habits that carry over to any model.
Common Mistakes to Avoid
- Skipping the manual and assuming a setting works the way it did on a previous computer.
- Leaving the gas mix on the default after switching tanks.
- Ignoring the ascent rate alarm during a current-driven drift.
- Forgetting to check the battery before a multi-day trip.
- Changing alarm thresholds the night before a dive without testing them.
Recommended Gear
A spare battery pack and a sturdy wrist or console mount help keep the computer visible and powered through a trip. Keep a small dive slate or waterproof notebook to record settings and surface intervals if you dive in areas without a backup.
- A replacement battery for your model keeps the unit running through long trips. View on Amazon
- A wrist mount or console bracket keeps the display in view during the dive. View on Amazon
- A waterproof dive slate lets you note settings and surface intervals underwater. View on Amazon
FAQ
Can I download the Sherwood Amphos manual online?
Yes, the manufacturer’s support pages usually host PDF versions. Match the document to your model and firmware version before relying on it.
Should I change the default alarm settings?
You can, and many divers adjust them to suit their experience and dive style. Test the new thresholds on land first so you know how the alarms behave.
Who should I ask if a setting is unclear?
Contact the manufacturer’s support team or a certified dive professional. Confirm any setting that affects decompression limits with a qualified instructor before you dive.
Conclusion
Read the manual at home, set your alarms and gas mix before you reach the boat, and learn the handful of screens you will use on every dive. A few minutes of preparation makes the computer far more reliable underwater. Always check the manual and a qualified instructor for anything that affects your dive limits.
Related reading
- Cressi Leonardo Dive Computer Manual: Setup, Modes and Key Settings Explained
- Zoop Suunto Dive Computer: A Step-by-Step Setup and Buying Guide
- Wrist Mounted Dive Computer: A Step-by-Step Guide for Choosing and Using One
Ready to choose one?
