We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Shearwater Air Integrated Dive Computer: Setup, Use and Buying Tips

Learn how the shearwater air integrated dive computer works, how to set it up with your regulator, and what to check before your next reef dive.

Updated November 2026

A shearwater air integrated dive computer reads your tank pressure directly from a high-pressure transmitter and shows remaining gas alongside depth, time and decompression data on one display. This guide walks you through what the integration means in practice, how to set the unit up on your regulator, and which habits keep the readings trustworthy on reef and shore dives.

What “Air Integrated” Actually Means

An air integrated computer connects wirelessly to a pressure transducer mounted on your first stage, so tank pressure appears on the same screen as your depth and no-stop time. You no longer need a separate analog gauge or a console with a second display. The transmitter communicates by radio, which means the computer must be paired and the battery in the transmitter must be fresh before every dive.

Step-by-Step Setup on Your Regulator

  1. Confirm your regulator has a high-pressure port that matches the transmitter’s fitting, and that the first stage is rated for the transmitter’s pressure range.
  2. Install the transmitter using a new O-ring and hand-tighten, then torque to the value your regulator manufacturer specifies. Do not use pliers.
  3. Pressurize the tank and open the valve slowly. Check the transmitter for leaks with a bubble-free soapy water test on the fitting.
  4. Power the computer and pair it with the transmitter. Confirm the displayed pressure matches your submersible pressure gauge within a few bar or psi.
  5. Set your gas mix and the high-pressure alarm threshold. Many divers set the reserve alarm at one third of starting pressure for reef dives.
  6. Run a short surface test with the regulator breathing, then close the valve and confirm the pressure reading drops as expected.

Reading and Trusting the Display on Dives

Check the pressure reading at the surface before descent, then again every few minutes. Compare it with your depth and remaining no-stop time so you can plan your ascent before the computer forces one. If the pressure value freezes, jumps or drops to zero, treat it as a failed transmitter and rely on a backup gauge.

Check When to do it What to look for
Transmitter battery Before each dive Fresh battery, no corrosion on contacts
Pairing Before each dive Stable pressure readout at the surface
Gas reserve alarm Surface setup Set to your planned reserve pressure
Backup gauge Every dive Matches computer reading within a small margin

Common Mistakes and Tips

  • Skipping the backup gauge. Always carry an independent pressure check.
  • Letting the transmitter battery run low before a trip. Replace it on a schedule rather than waiting for a warning.
  • Ignoring a pressure reading that looks wrong. Verify with a second method before you descend.
  • Forgetting to rinse the transmitter in fresh water after salt dives and keep the port cap in place when not in use.
  • Reading the display only at depth. Glance at tank pressure at the surface and during your safety stop.

A spare transmitter battery and a fresh O-ring kit make it easy to keep the system working on multi-day trips: View on Amazon.

A small dive log or dive planning slate helps you record pressure readings and gas use across dives, which makes spotting a pattern much easier: View on Amazon.

For background on how the computer fits with the rest of your kit, see Scuba Regulator with Dive Computer: 6 Steps to Match and Set Up and Oceanic Dive Mask Computer: 5 Steps to Choose and Set Up for Reef Diving. If you are choosing a mask to pair with a display, 4 Best Dive Masks with Computer for Reef Divers: Picks Compared (2026) covers the options.

FAQ

Do I still need a backup pressure gauge with an air integrated computer?

Yes. Radio transmitters can fail or lose pairing, so an independent submersible pressure gauge is a sensible backup on every dive.

How often should I replace the transmitter battery?

Follow the schedule in the manufacturer’s manual and replace it before a trip rather than waiting for a low-battery warning.

Can I set up the transmitter myself?

Many divers install it themselves, but a dive shop or regulator technician should check the fitting and torque if you are unsure. Consult a professional if you have doubts about the installation.

Conclusion

An air integrated computer puts tank pressure, depth and decompression data in one place, which simplifies planning on every dive. Set it up carefully, verify the reading against a backup gauge, and keep the transmitter maintained. Those habits matter more than any single feature.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba diving gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Lanai.