We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Dive Rite Nitek Computer: Setup, Use and Buying Tips for Reef Divers

Learn how to set up, read and buy a Dive Rite Nitek computer for reef diving, with practical steps, common mistakes and tips for choosing the right model.

Updated November 2026

A Dive Rite Nitek computer is a dive computer that tracks your depth, time and decompression status so you can plan safer, more comfortable reef dives. This guide walks you through the basics of setting one up, reading its display during a dive, and choosing the right model for the way you dive. Check the manufacturer’s manual for the exact menus on your unit, since button sequences can vary by version.

Before You Dive: Setup Basics

Start with the settings that affect your dive planning. Set your units (metric or imperial), your altitude mode if you dive above sea level, and your gas mix if the unit supports nitrox. Confirm the alarm thresholds, since these control when the computer warns you about depth, ascent rate and remaining no-stop time.

Shopping for one? See our guide: 4 Best Dive Masks with Computer for Reef Divers: Picks Compared (2026).

  1. Charge or check the battery fully before the trip.
  2. Set the date and time so your logbook entries line up.
  3. Choose your gas profile (air or nitrox, and the oxygen percentage if applicable).
  4. Review alarm settings for maximum depth and ascent speed.
  5. Confirm the unit is in dive mode and not surface or log mode before you enter the water.

Reading the Display During a Dive

Most reef divers focus on four readouts: current depth, bottom time, no-stop time remaining and ascent rate. Glance at the no-stop time each time you change depth, because a deeper swim near the end of a dive can shorten it faster than you expect. Keep your ascent rate within the limit set on the unit, typically a speed you can hold while watching your bubbles and fish.

If the computer shows a safety stop prompt, treat it as a planning requirement, not a suggestion. Plan your air supply so you can complete the stop without rushing. For a broader look at how dive computers handle these prompts, see Using a Dive Computer: A Step-by-Step Guide for Reef Divers.

Choosing the Right Model for Reef Diving

Reef diving usually involves moderate depths, frequent depth changes and long surface intervals. Look for a computer with a clear, high-contrast display that you can read at a glance, and a simple menu you can navigate with gloves on. Check whether the unit offers a console or wrist format, since that decision affects how it sits with your gauges and hoses.

Factor What to check
Display Readability in low light and at a glance
Mounting Wrist or console, and fit with your regulator set
Gas support Air only or nitrox capable
Battery Replaceable or rechargeable, and how often owners report needing service
Menu simplicity Number of button presses to change common settings

If you are comparing formats, Wrist Mount Dive Computer: Is It Right for You? Setup and Tips covers the tradeoffs in more detail.

Common Mistakes to Avoid

  • Skipping the pre-dive check and discovering a low battery underwater.
  • Ignoring the ascent rate alarm during a slow swim back to the boat.
  • Leaving the gas mix set to air when diving nitrox.
  • Assuming the no-stop time is fixed when a deeper excursion has cut it short.
  • Failing to log dives, which makes it harder to track surface intervals between days of diving.

A dive computer works best when it is paired with a reliable surface marker and a sturdy mount. Consider these supporting items:

  • A surface marker buoy helps your boat crew find you during a safety stop. View on Amazon
  • A console or wrist mount keeps the computer secure and visible on your gear. View on Amazon
  • A spare battery kit lets you keep the unit running on longer trips. View on Amazon

FAQ

Can I use a Dive Rite Nitek computer for nitrox diving?

Only if the specific model supports nitrox settings. Check the manufacturer’s specifications for your unit before you plan a nitrox dive.

How often should I service the computer?

Follow the manufacturer’s service interval and any guidance from a certified dive shop. Have the unit checked after any impact or water exposure beyond normal use.

What should I do if the computer shows an error during a dive?

Stop your ascent planning, follow your dive plan and buddy procedures, and use a backup depth gauge and timer if you have one. Consult a dive professional before diving with the unit again.

Conclusion

A Dive Rite Nitek computer is only as useful as the setup you give it before each dive. Run through your settings, check the battery and alarms, and read the display with the same discipline you apply to your air supply. Consult a certified instructor or dive professional if you are unsure about any setting or safety procedure.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba diving gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Lanai.