Dive Computer Cressi Leonardo: Setup, Settings and Buying Tips for Reef Divers
Learn how to set up, read and choose a dive computer Cressi Leonardo style for reef dives. Practical steps, common mistakes and tips for new and experienced div
Updated November 2026
A dive computer Cressi Leonardo style gives you real-time depth, time, ascent rate and no-decompression limits in one compact console. This guide walks you through setting it up before a dive, reading the display underwater, and deciding whether this type of computer suits the diving you do. Check the manufacturer manual for your exact model before relying on any setting.
Understand What the Cressi Leonardo Computer Does
The Leonardo is a wrist-worn, multi-mode dive computer from Cressi, an Italian brand known for dive masks, fins and regulators. It tracks depth and bottom time continuously, calculates a no-stop limit, and shows an ascent-rate indicator. Most owners use it for recreational air dives, so the core job is keeping you inside safe limits on each dive. For mode details and the full menu, see Cressi Leonardo Dive Computer Manual: Setup, Modes and Key Settings Explained.
Shopping for one? See our guide: 4 Best Dive Masks with Computer for Reef Divers: Picks Compared (2026).
Set Up the Computer Before Your Dive
Good setup takes about five minutes and should happen before you leave the dock. Work through these steps:
- Confirm the battery level on the start screen. A low battery during a dive is a problem you can avoid.
- Select the correct mode (air or nitrox, if your model supports it) and enter the oxygen percentage for any nitrox mix.
- Set the units (metric or imperial) so depth and temperature readings match what you expect.
- Check the alarm thresholds for maximum depth, ascent rate and no-stop time. Keep defaults unless you have a clear reason to change them.
- Pair the wrist strap and confirm the display is readable with your dive gloves on.
If you dive with a separate computer as backup, set both before you descend. For a broader walkthrough of first-time setup, read The First Step in Using My Dive Computer Is Setting It Up Correctly.
Read the Display During the Dive
Check the computer at regular intervals rather than only when an alarm sounds. Glance at it at the start of each descent, every few minutes at depth, and before beginning your ascent. Note these readings:
- Current depth and maximum depth reached
- Elapsed dive time and remaining no-stop time
- Ascent rate indicator, which should stay within the range shown on the display
- Any safety-stop prompt during your ascent
Treat every alarm as a prompt to act, not to silence. If the computer tells you to slow down or stop, do it.
Choose the Right Computer for Your Diving
A Leonardo-style computer fits most recreational reef and shore divers who want a straightforward wrist unit. Compare these factors before buying:
| Factor | What to Check |
|---|---|
| Diving type | Air-only or nitrox capability, and whether you plan technical dives |
| Mounting | Wrist mount versus console mount, based on your gear setup |
| Display | Readability in low light and with gloves |
| Battery | Replacement method and how often your model needs service |
| Logging | Dive log capacity and download compatibility with your computer |
For a comparison of wrist and console designs, see Wrist Mounted Dive Computer: A Step-by-Step Guide for Choosing and Using One. Divers who prefer a wrist unit for simplicity may also find Wrist Mount Dive Computer: Is It Right for You? Setup and Tips useful.
Keep the Computer Ready Between Dives
Rinse the unit in fresh water after every dive and dry it away from direct sun. Check the battery on a schedule set by the manufacturer. If the display fades or the unit shows a low-battery warning, replace the battery before your next trip. The steps for this are covered in Cressi Leonardo Dive Computer Battery: Replacement Steps and Tips.
Common Mistakes to Avoid
- Skipping the pre-dive check and discovering a low battery at depth.
- Setting nitrox percentages incorrectly, which changes every no-stop limit the computer reports.
- Ignoring the ascent-rate indicator because the dive feels relaxed.
- Diving without a backup gauge or a second computer on deeper trips.
- Never reviewing the manual, so unfamiliar screens cause hesitation underwater.
Recommended Gear
A few supporting items make the computer easier to use on the reef. A wrist strap that holds the unit snugly keeps the display visible during fin kicks. A spare battery matched to your model means a dead unit won’t end your dive day. A dive light helps you read the screen in shadowy reef ledges.
- Replacement wrist strap for dive computers: keeps the unit secure and in view while you swim. View on Amazon
- Spare dive computer battery for your model: lets you replace power before a trip rather than on the dock. View on Amazon
- Compact dive light: helps you read the display and spot reef features in low light. View on Amazon
FAQ
Is the Cressi Leonardo suitable for beginners?
Yes, for recreational air diving it is a common choice because the display gives clear depth, time and ascent information. Beginners should still complete a dive course and read the manual before their first dive with it.
How often should I replace the battery?
Follow the manufacturer’s guidance for your model and replace the battery when the low-battery warning appears or the display dims. Many owners prefer to change it on a schedule rather than waiting for a warning.
Can I use the computer for nitrox dives?
Only if your specific model supports nitrox mode. Check the manual for your model and enter the correct oxygen percentage before diving. Consult a qualified instructor if you are unsure.
Conclusion
A careful setup, steady display checks and a clear understanding of the alarms will get the most from a dive computer Cressi Leonardo style. Read the manual for your exact model, keep spare batteries on hand, and confirm your settings before every dive. Consult a certified instructor or dive professional for guidance on any dive profile outside recreational limits.
Related reading
Ready to choose one?
