We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Aqua Lung 5mm Wetsuit: Sizing, Fit and Warmth Guide for Divers

Learn how to choose and fit an aqua lung 5mm wetsuit, from sizing and seam checks to warmth, care and when a hood or extra layer makes sense.

An aqua lung 5mm wetsuit is a good fit for many temperate and cooler-water dives, but only if you pick the right size, understand how the thickness is built into the suit, and match it to your water temperature and dive style. By the end of this guide, you will know how to measure yourself, test the fit in the shop, judge whether 5mm is enough for your conditions, and care for the suit so it keeps its insulation season after season.

What the 5mm Rating Actually Means

The number on a wetsuit refers to neoprene thickness, usually measured in millimeters at the torso. Many suits use a compound thickness, meaning the core of the torso is thicker, often 5mm, while the arms and legs may be 3mm or 4mm to allow movement. This is standard design, not a defect. It is worth reading the spec sheet for your specific model, since manufacturers list zone thicknesses separately and the marketed “5mm” can mean the chest and core only.

Shopping for one? See our guide: Aqua Lung Wetsuit 3mm Review: Features and Performance.

Thickness is only one part of warmth. Neoprene is insulating because it traps tiny gas bubbles, and those bubbles compress with depth. A 5mm suit at 60 feet is noticeably thinner in effect than it is at the surface, which is why many divers choose slightly thicker suits for deep or cold dives and why a dive computer or depth-aware habit matters.

Compound Thickness and Zones

Look for these zones on the spec label or product description: core (torso, usually the thickest), arms, legs, and any hood or boot panels. A typical 5mm suit might be 5/3mm, meaning 5mm core and 3mm limbs. The thinner limbs help you move, but they lose heat faster, so pay attention to your extremity comfort when you test the suit.

Step-by-Step: Choosing the Right Size

Sizing is where most people go wrong with wetsuits. Manufacturers publish size charts based on height and weight, but cuts vary, so always check the specific chart for the model you are considering. Measure yourself before you shop.

Step 1: Take Your Measurements

  1. Height: stand straight, without shoes, against a wall.
  2. Chest: measure at the fullest point under the arms, keeping the tape level.
  3. Waist: measure at the navel, relaxed, without sucking in.
  4. Hips: measure at the widest point of the seat.
  5. Inseam: measure from the crotch to the ankle bone.

Step 2: Compare Against the Chart

Match your height and weight first, then check whether your chest and waist measurements fall within the same size band. If you land between two sizes, many divers go with the smaller size for a snugger fit, since neoprene stretches and loosens over time. Be aware that a wetsuit that feels slightly tight on land usually relaxes after a few minutes in the water.

Step 3: Test the Fit

Put the suit on in the store or at home before a dive. Your checklist should look like this:

  • The chest panel should feel firm but not restrictive when you inhale deeply.
  • You should be able to raise both arms overhead without the back lifting far from your body.
  • Squat and bend at the knees. The seat and inseam should not pull hard at the crotch.
  • The neck seal should sit snugly but allow you to turn your head.
  • No large gaps should appear at the wrists, ankles or neck when you move.

Getting the Warmth Right

Once the fit is set, warmth depends on water temperature, your body, and how you manage heat between dives. A 5mm suit is generally designed for water roughly in the 60s to low 70s Fahrenheit, though individual tolerance varies widely. Thin, lean divers often feel cold sooner, and longer dives drain heat even in comfortable water.

Match the Suit to the Water

Water Temperature (approx.) Suggested Setup
Above 78°F Shorty or 3mm, depending on comfort
72–78°F 3mm full suit or 3mm top with shorty
65–72°F 5mm full suit, often adequate for typical dives
Below 65°F 5mm with hood, or 5mm plus a vest or added layer

These ranges are general guidance. Your personal comfort, dive length and surface conditions matter as much as the number on the thermometer. If you are unsure, consult an experienced local instructor or dive operator, especially for cold-water sites.

Extra Warmth Strategies

  • Add a hood if your head loses heat quickly. Much body heat escapes through the head and neck.
  • Consider a vest layer under the suit on cold days, which adds insulation without changing the outer fit.
  • Keep the suit damp, not dripping, between dives in cold water. Some divers rinse and reuse suits, which keeps the neoprene closer to body temperature.
  • Drink warm fluids and eat between dives to support your core temperature.

Caring for Your Aqua Lung 5mm Wetsuit

Proper care keeps neoprene flexible and insulating. Rinse the suit in fresh water after every dive, including salt, sand and chlorine if you have been in a pool. Turn it inside out to dry, hang it on a wide hanger in shade, and avoid direct sun for long periods, which degrades neoprene. Store it loosely rather than folded tightly, and keep zippers waxed and clear of grit.

Common Mistakes

  • Buying a size up for comfort, which lets water flush in and reduces warmth.
  • Ignoring the zone thicknesses and assuming the entire suit is 5mm.
  • Trying to dry the suit in a closed car or hot dryer, which warps the neoprene.
  • Skipping the hood in cold water and then blaming the suit for poor warmth.
  • Judging fit only on land without checking how the suit moves in a squat or arms-up position.

Pairing the suit with the right accessories makes a real difference in cold water. A neoprene hood reduces the single biggest source of heat loss for many divers. View on Amazon

Wetsuit gloves and boots protect the extremities, which often lose heat first in a 5mm setup. View on Amazon

A wetsuit-specific rinse bucket or tub makes post-dive freshwater rinsing simple and thorough. View on Amazon

A wide plastic or wooden wetsuit hanger keeps the shoulders from stretching while the suit dries. View on Amazon

For a broader look at how 5mm suits compare with other thicknesses, see 3mm vs 5mm Wetsuit (2026): Which Is Better for Reef Diving? and Farmer Jane Wetsuit 5mm: Sizing, Fit, and Warmth Explained. If you dive cold water often, 8 Best 5mm Wetsuits with Hood for Cold-Water Diving (2026) covers hooded options in more detail. Divers comparing several brands may also find 7 Best 5mm Wetsuits for Scuba Diving Compared for Temperate and Tropical Water useful.

Tips

  • Try on suits late in the day, when your body is at its largest after a day of activity.
  • Wear the same undergarments you plan to dive in, if any, during the fitting.
  • Rinse the suit thoroughly and let it dry fully before storing it for winter.
  • Track water temperatures for your home site so you can plan which thickness to bring.

FAQ

Is a 5mm wetsuit warm enough for scuba diving?

For many temperate and cooler tropical dives, a 5mm suit is comfortable, especially with a hood. In colder water, you may need additional layers or a thicker suit for longer dives.

Should I size up or down for a 5mm suit?

Most divers choose a fit that is snug but not restrictive. Neoprene stretches slightly with wear, so a suit that feels firm on land is often right. Avoid sizing up, which allows water to circulate and reduces warmth.

How long should a 5mm wetsuit last?

With regular rinsing and proper storage, many suits remain usable for several seasons. Heavy use, sun exposure and poor drying shorten their life. Inspect seams and zippers periodically.

Can I wear a 5mm suit in a pool?

Yes, though it may feel warm. Rinse it afterward to remove chlorine, which can degrade neoprene over time.

Do I need a hood with a 5mm wetsuit?

A hood is recommended in cold water, since a large share of body heat escapes through the head. In warmer water, you may not need one.

How do I dry a wetsuit without damaging it?

Rinse it in fresh water, turn it inside out, and hang it on a wide hanger in shade. Avoid hot dryers, direct sunlight and tight folding.

Is a 5mm wetsuit good for warm-water reef diving?

It can be, but in tropical water many divers find a 3mm suit or shorty more comfortable. A 5mm suit suits cooler reef sites or divers who run cold.

Conclusion

A well-fitted aqua lung 5mm wetsuit can keep you comfortable across a wide range of dives when you match thickness to water temperature and dive length. Measure carefully, test the fit with a full range of movement, and add a hood or extra layer when conditions call for it. With regular rinsing and careful drying, your suit will stay flexible and warm for many seasons.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba diving gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Lanai.