We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Sherwood Sentry Dive Computer: Setup, Reading and Buying Tips for Divers

Learn how to set up, read and choose a Sherwood Sentry dive computer for reef and shore dives, with practical tips on settings, safety and buying.

Updated November 2026

A Sherwood Sentry dive computer is a compact tool that tracks depth, time and decompression status so you can plan safer, more predictable dives. This guide walks you through the basics of a sherwood sentry dive computer: what to check before you go, how to read the display underwater, and what to look for if you are shopping. The goal is simple. By the end, you should know how to use the unit with confidence on your next reef or shore dive.

Before You Dive: Setup and Checks

Set the unit up on land, not in the water. Confirm the date, time and units (feet or meters) first, because a wrong unit setting is an easy mistake that causes confusion at depth. Check the battery indicator and make sure the display shows clearly in ambient light.

Shopping for one? See our guide: 4 Best Dive Masks with Computer for Reef Divers: Picks Compared (2026).

  1. Power on the computer and verify the time, date and unit settings.
  2. Confirm the battery level. Plan a replacement schedule rather than waiting for a warning.
  3. Check the display contrast and backlight, especially if you dive at dawn or dusk.
  4. Look over the strap, buckle and console mounting so nothing loosens on the surface.
  5. Record your surface interval and any recent dives, since residual nitrogen affects your readings.

Reading the Display During a Dive

Make a habit of glancing at the computer at regular intervals rather than only when something feels wrong. Note your current depth, elapsed dive time, and the no-decompression or ascent information shown. On a reef dive, many divers check every few minutes and again whenever they change depth significantly.

Keep your eyes on the depth reading during descents and ascents. Ascend at a controlled rate, typically the rate your unit specifies, and pause at a safety stop if the computer or your training recommends one. Check the manufacturer’s manual for the exact alarm behavior and display layout for your model.

Planning Dives Around Your Computer’s Data

Use the computer’s planning information to set your bottom time before you enter the water. Plan a conservative profile, especially if you are diving multiple days in a row. Shallow, longer dives often produce more conservative readings than short, deep ones, so think about your whole day, not just one dive. The unit can only track what you give it, so log each dive accurately.

Keep your dive log current. Reviewing past profiles helps you spot patterns in how you descend, how long you stay at depth and how quickly you ascend. Our Using a Dive Computer: A Step-by-Step Guide for Reef Divers covers that logging habit in more detail.

Buying Tips for a Sherwood Sentry Dive Computer

If you are shopping, compare the display readability, the mounting options and the battery type before anything else. A console or wrist-mounted unit each has trade-offs in visibility and comfort, so consider how you prefer to check your data. Confirm that the model you find matches your certification level and the diving you plan to do, and check the manufacturer’s specifications for depth rating and features.

For a broader comparison of mounting styles, read Wrist Mounted Dive Computer: A Step-by-Step Guide for Choosing and Using One and Scuba Dive Computer Console: How to Choose and Set One Up (2026). Both help you decide whether a console or wrist format suits your diving.

Common Mistakes

  • Leaving the units or time zone at factory defaults before the first dive.
  • Ignoring a low battery warning and discovering it mid-dive.
  • Diving with a profile logged from a previous day without checking residual nitrogen.
  • Glancing at the display only when something feels wrong.
  • Skipping the pre-dive checks because the unit worked last time.

A spare battery and the correct replacement type make maintenance far simpler. View on Amazon

A console or wrist mount that keeps the unit visible without snagging on gear helps you check it often. View on Amazon

A protective case or cover keeps the display clear during transport and storage between dives. View on Amazon

FAQ

How often should I check my Sherwood Sentry dive computer during a dive?

Check it at regular intervals, especially after any depth change, and whenever the unit alerts you. Frequent glances help you stay aware of your ascent and decompression status.

What should I do before my first dive with a new unit?

Set the time, date and units on land, confirm the battery level and review the manual for alarm behavior. Log any previous dives so the unit has accurate surface interval data.

Where can I find the exact specifications for my model?

The manufacturer’s manual and official product information list depth ratings, battery type and features. Consult a qualified dive professional if you have questions about safe use or decompression planning.

Conclusion

A sherwood sentry dive computer is most useful when you set it up correctly, check it often and plan your dives around its data. Build a simple pre-dive routine and keep your logs current. Reviewing the manual and talking with an experienced instructor will help you use the unit safely on every dive.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba diving gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Lanai.