Mares Nemo Dive Computer: Setup, Settings and Buying Tips for Reef Divers
Learn how to set up and use the Mares Nemo dive computer, from display basics and dive modes to battery checks and common mistakes on reef dives.
Updated November 2026
The Mares Nemo dive computer is a compact, console-style instrument aimed at recreational divers who want depth, time and decompression data without a lot of menu work. This guide walks you through what the display shows, how to prepare it before a dive, and what to check so it works properly on your next reef or shore dive. Confirm exact features and button functions against the manual that came with your unit, since firmware and models can differ.
Understand the Display Before You Dive
Spend a few minutes with the Nemo on your bench before you touch water. Learn where the current depth, dive time, no-decompression limit and ascent indicator appear. On a bright surface, you want to read the main numbers at a glance, not hunt for them while you are adjusting your buoyancy.
Pay attention to the battery indicator and any alarm icons. Knowing what each one looks like means you will not have to stop and decode a warning at 15 meters.
Prepare the Unit Step by Step
- Charge or check the battery and confirm it shows a full or near-full level.
- Rinse the unit in fresh water after your last dive and inspect the seals for sand or hair.
- Set the units (metric or imperial) and confirm the correct dive mode for your activity.
- Check that the alarm settings match your comfort level, especially depth and ascent-rate warnings.
- Mount the computer on your wrist or console and make sure the strap is snug but not restrictive.
- Turn it on at the surface and confirm it reads zero depth before you descend.
Set Up Settings for Reef and Shore Diving
Reef dives tend to be shallow and long, while shore dives often involve a surface swim and variable depths. Adjust your settings to match the profile you expect. Set the alarms to reflect the depth you plan to stay within, and review how the computer handles conservative planning if you are diving near the limits of your training.
| Dive type | What to check |
|---|---|
| Shallow reef | Dive time and ascent rate alarms |
| Shore dive with surface swim | Depth alarm and surface interval timing |
| Multi-day trip | Battery level and no-decompression status between dives |
Read and Use the Data During the Dive
Check the computer at regular intervals rather than only when an alarm sounds. Note your depth, time and no-decompression limit, and ascend slowly when the display prompts you to. If you see a warning, follow your training: stop, reassess and ascend as your agency teaches. Log the dive afterward to keep your records accurate.
Common Mistakes
- Skipping the pre-dive check and discovering a low battery at depth.
- Leaving the unit on the boat or in a hot car, which can affect battery life.
- Ignoring ascent-rate warnings because the dive feels calm.
- Failing to rinse the computer and letting salt crystals form on the buttons.
- Using default settings without checking whether they match your dive plan.
Recommended Gear
A computer is easier to read and protect with the right accessories. These picks are useful alongside the Nemo:
- A soft silicone or neoprene wrist strap helps keep the computer steady and reduces scratches on your wetsuit and console hoses. View on Amazon
- A small console cover or boot protects the display from abrasion during transport and on the boat. View on Amazon
- A spare battery kit or replacement battery means you are not stuck if the unit runs low on a trip. View on Amazon
If you are still deciding how your computer fits with the rest of your kit, these related guides cover the connection points: Scuba Regulator with Dive Computer: 6 Steps to Match and Set Up explains how to match a computer to your regulator setup, while 4 Best Dive Masks with Computer for Reef Divers: Picks Compared (2026) covers masks that pair with a wrist or console unit. For a mask with a built-in display option, see Oceanic Dive Mask Computer: 5 Steps to Choose and Set Up for Reef Diving.
FAQ
Does the Mares Nemo need to be charged before every dive?
Check the battery level before each trip and charge it if it is low. Battery life depends on use and conditions, so confirm the expected run time in your manual.
Can I use the Nemo for multiple dives in one day?
Yes, but review the surface interval and no-decompression status between dives. Follow the computer’s guidance and your training agency’s surface interval rules.
What should I do if the display shows a warning underwater?
Stop, assess your situation and follow the procedures you were taught for that warning. If you are unsure about a reading or your fitness to dive, consult a dive professional before your next dive.
Conclusion
Setting up the Mares Nemo dive computer properly comes down to learning the display, checking the battery and matching the alarms to your planned dive. Work through the pre-dive checklist every time, and review the logged data afterward. Used with consistent habits, the Nemo can support safer, better-planned reef and shore dives.
Related reading
- Mares X-Vision Dive Mask: Fit, Seal and Buying Tips for Reef Divers
- Mares Trilastic 5mm Dive Boots: Fit, Warmth and Buying Tips
Ready to choose one?
