We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

SEAC Screen Dive Computer: Setup and Reading Guide for Reef Divers

Learn how the SEAC Screen dive computer works, how to set it up, and how to read its display on reef dives. A practical guide for new and returning divers.

Updated November 2026

A SEAC Screen dive computer is a wrist-worn or console-mounted instrument that tracks depth, time and decompression status so you can plan and monitor each dive. This guide walks through the basic setup, how to read the display during a reef dive, and a few habits that keep your dive log accurate. It is written for divers who have just bought a SEAC Screen dive computer or are considering one.

Step 1: Set Up Your Personal Data

Before your first dive, enter your personal settings in the menu. Confirm the unit system (metric or imperial), the water type (salt or fresh), and your altitude setting if you dive above sea level. Most manufacturers specify that the altitude setting should match the elevation of your dive site, so a mountain lake needs a different value than a coastal reef.

Shopping for one? See our guide: 4 Best Dive Masks with Computer for Reef Divers: Picks Compared (2026).

Set your gas mix if the computer supports nitrox. Enter the oxygen percentage exactly as printed on your tank label. A wrong value here can make the computer’s decompression calculations unreliable, so double-check it before every nitrox dive.

Step 2: Understand the Display During a Dive

Once you descend, the main screen shows current depth, elapsed dive time, and the remaining no-decompression time. Learn where each figure sits before you get in the water. In an emergency you should be able to read depth and ascent information in a few seconds without fumbling through menus.

Pay attention to the ascent rate indicator. Recreational guidance commonly uses a rate of about 9 meters (30 feet) per minute, and most computers flash a warning when you exceed the limit set by the manufacturer. Slow down when you see it, and plan a safety stop as recommended by your training agency.

Step 3: Plan Your Dive and Track Your Surface Interval

After surfacing, check the surface interval and the nitrogen loading the computer reports. Many owners find the planning screen useful for deciding how long to wait before a second dive. Treat the figures as guidance and make your own conservative choices, especially after deep or repetitive dives.

If you are unsure how the computer integrates with your other equipment, a related guide on matching a regulator and dive computer covers the hose and console details: Scuba Regulator with Dive Computer: 6 Steps to Match and Set Up.

Common Mistakes

  • Skipping the altitude and gas settings, which changes the calculations.
  • Not checking the battery before a trip. Carry a spare plan if the unit is battery-dependent.
  • Ignoring the ascent rate alarm during a reef dive where you are tempted to chase fish.
  • Diving repetitively without reviewing the surface interval guidance.
  • Leaving the computer unrinsed after saltwater dives, which can affect buttons and seals.

A dive light helps you read the screen in low-light conditions and lets you check your depth and time on deeper or late-afternoon dives. Look for a model suited to your dive type, and see Top 5 SEAC R15 Dive Light Picks Compared for Night and Reef Diving for options that pair well with reef work.

Consider a dive mask that gives you a clear view of the console. Some divers prefer a mask with a wide field of view when reading a wrist computer. View on Amazon

A protective strap or wrist mount keeps the computer secure during entries and exits. View on Amazon

FAQ

Do I need to set the computer every time I dive?

Check the settings before each dive, especially the gas mix and altitude. Settings usually persist between dives, but confirming them takes only a moment.

What should I do if the ascent rate alarm sounds?

Slow your ascent immediately until the warning clears, then continue at the recommended rate. Plan your safety stop as your training agency teaches.

Can I rely on the computer alone for dive planning?

No. The computer is a tool to support your planning and training, not a substitute for them. Consult a certified dive professional if you have questions about your personal dive limits or health.

Conclusion

Setting your personal data correctly, learning the display before you enter the water, and respecting the ascent and surface interval guidance will make your SEAC Screen dive computer far more useful. Review the manufacturer’s manual for the exact menu steps on your model. Practice the basics in shallow water before you rely on the computer on deeper reef dives.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba diving gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Lanai.