We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Body Glove 5mm Wetsuit: Sizing, Fit and Warmth Guide for Island Divers

Learn how to choose, size and care for a body glove 5mm wetsuit for reef and shore dives, with fit checks and warmth tips for island water.

Updated November 2026

A body glove 5mm wetsuit can keep you comfortable on reef and shore dives in temperate island water, but only if it fits well and matches the conditions you dive in. This guide walks you through checking the water temperature, sizing the suit, testing the fit and caring for it so it stays warm and flexible. By the end, you will know whether a 5mm suit is the right call for your dives and how to pick the right size.

Step 1: Confirm the Water Temperature Range

Thickness is the first decision, and it depends on the water you dive in most. A 5mm suit is generally a good fit for water in the mid-60s to upper 70s Fahrenheit, which covers many warm-season reef dives. Colder water or long bottom times may call for more thickness or a hood. For a closer look at the numbers, see What Temperature Is a 5mm Wetsuit Good For? Water Range and Tips.

Shopping for one? See our guide: 3mm vs 5mm Wetsuit (2026): Which Is Better for Reef Diving?.

Step 2: Size the Suit by Measurement, Not Label

Brands use different cuts, so the tag size alone is not enough. Measure your chest, waist, hips, inseam and height, then compare those numbers against the brand’s sizing chart. If you fall between sizes, most divers do better with the smaller size in the torso and the larger size in the legs and arms when the brand offers a sizing chart with those options.

Keep in mind that a wetsuit should feel snug, not loose. Water needs to be trapped close to your skin and warmed by your body, and a loose suit lets it flush through. For cut-specific details, O'Neill Wetsuit 5mm Guide: Sizing, Fit and Warmth for Island Diving covers how fit changes across brands.

Step 3: Check the Fit in Dry Conditions

Before you get in the water, run through a short fit check:

  • Pull the suit on and close the zipper fully. Confirm the zipper sits flat against your back.
  • Raise both arms overhead. The shoulders should move without the suit lifting off your torso.
  • Squat fully. The knees should not bind, and the crotch should not feel stretched tight.
  • Check the neck seal. It should be snug enough to hold water out without restricting breathing.
  • Confirm the wrists and ankles have a close seal, with no gaps you can slide a finger through.

Step 4: Prepare the Suit Before Each Dive

Rinse the suit in fresh water after every dive and hang it inside out in shade. Direct sun and heat can dry out neoprene and shorten its life. If you need to pull it on quickly, a light coat of wetsuit lubricant on the inside of the legs and arms can help, though it should be rinsed off after use. Store the suit flat or loosely folded, not compressed in a tight bag.

Common Mistakes

  • Buying a suit that feels loose in the store. Neoprene stretches slightly with use, but a loose fit will mostly stay loose.
  • Ignoring the water temperature and assuming 5mm is always enough.
  • Drying the suit in the sun, which can stiffen and crack the neoprene.
  • Skipping the neck and wrist seal check, which causes most early cold spots.
  • Storing the suit wet or tightly rolled, which invites odor and compression damage.

A few accessories make a 5mm suit more comfortable on shore and boat dives. Look for these:

  • Wetsuit boots, which add warmth and protect your feet when entering rocky shorelines. View on Amazon
  • Wetsuit gloves, which protect your hands on reef dives and help with grip during the surface interval. View on Amazon
  • Wetsuit lubricant, which makes pulling a snug suit on much easier. View on Amazon

FAQ

Is a body glove 5mm wetsuit warm enough for year-round diving on the island?

It depends on the season and your tolerance for cold. Many divers find a 5mm suit comfortable during warmer months, and they add a hood or thicker suit when the water drops.

How tight should a 5mm wetsuit feel?

It should feel snug across the chest, back and limbs, with no loose folds. You should be able to move your arms and bend your knees without the suit pulling hard.

How often should I rinse my wetsuit?

Rinse it after every dive in fresh water, and dry it inside out in shade. Consult the manufacturer’s care instructions for specific cleaning products.

Conclusion

A body glove 5mm wetsuit works well for many reef and shore dives when the water temperature matches its range. Measure yourself, test the fit before you dive and rinse and dry the suit carefully after every session. Those steps will keep you warm, mobile and comfortable on the water.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba diving gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Lanai.